COMPACT
Descrizione
Technical data:
| - Min. width of the panel | mm 80 |
| - Min. length of the panel | mm 180 |
| - Max. thickness of the panel | mm 60 |
| - Min. thickness of the panel | mm 9 |
| - Edge dim. in strips min. - max. | mm 0,4 - 8 |
| - Edge dim. in rolls min. - max. | mm 0,4 - 3 |
| - Feed speed | m/1’ 12 |
| - Glue tank capacity | lt 2 |
| - Installed motor power | kW 7,1 |
| - Air pressure | Bar 7 |
| - Weight | Kg 1200 |
| - Overall dimensions | mm 3800 x 900 x 1600 |
CE equipment:
- Tape roll holder table ø 700 mm
- Conveyor roller for wide panels
- 3 mm thickness roll edge cutter
- Manual movement of the upper pressure with digital readout
- Teflon tank
- Protection booth on all operation units
- 1 dust extraction hood ø 100 mm
- Automatic loader of edges in strips
- Hanging control panel
- CE standard
Operating units:
- Gluing and edge pressure units
Teflon tank / Glue spreading roller
Temperature controlled through the control panel for both units.
Glue tank with automatic stand-by of the temperature.
First motorized and clutched roller Ø 135 mm, plus 3 pressure idle rollers Ø 75mm
- End-Cutting unit
2 HF tilting motors 12.000 rpm - HP 0,7 ( kW 0,5 ) each
- Fine-Trimming unit
2 HF tilting motors 12.000 rpm - HP 1 ( kW 0.7 ) each
with digital readout
Optional:
| BRUSHING UNIT 2 motors - HP 0,5 ( kW 0,38 ) each with cloth discs ø 180 mm |
| TOUCH SCREEN 10 inch monitor Include PLC to manage the units Compulsory for optional : SM.MAC. 4-6-7-8 |
| CLEANING UNIT |
| HEATING LAMP BEFORE THE GLUING UNIT |
| PNEUMATIC DISENGAGEMENT FROM CONTROL PANEL (on/off) - each unit |
| QUICK WORK CHANGEOVER DEVICE To manage FROM THE CONTROL PANEL the switching from thin edges to thicker edges (ABS/PVC) Pressure roller conveyor/Trimming unit/Edge scraping |
| PNEUMATIC TILTING OF END CUTTER FROM CONTROL PANEL From 0° to 10° (AVAILABLE ONLY WITH TOUCH SCREEN) |
| GLUE SCRAPER |
| HOT BLOWER UNIT for PVC and ABS |
| VOLTAGE DIFFERENCE (STD 400/50) |