PLATINUM

Descrizione

 

Technical data:

-  Min. width of the panel	mm 80
-  Min. length of the panel	mm 180
-  Max. thickness of the panel	mm 60
-  Min. thickness of the panel	mm 9
-  Edge dim. in strips   min. - max.	mm 0,4 - 8
-  Edge dim. in rolls   min. - max.	mm 0,4 - 3
-  2 feed speeds	m/1’  12/16
-  Glue tank capacity	lt 2
-  Installed motor power	kW 10,7
-  Air pressure	Bar  7
-  Weight	Kg 1500
-  Overall dimensions	mm 4900 x 900 x 1600

CE equipment:

• Tape roll holder table ø 700 mm
• Conveyor roller for wide panels
• 3 mm thickness roll edge cutter
• Manual movement of the upper pressure with digital readout
• Teflon tank
• Protection booth on all operation units
• 2 dust extraction hoods ø 100 mm
• Automatic loader of edges in strips
• Units managed by PLC
• Hanging control panel – Touch screen 10 inch monitor
• CE standard

Operating units:

• Pre-Milling unit

2 HF motors 12.000 rpm - HP 2,5 ( kW 1,8 ) each

2 cutters ø 80 x 50 x 20  Z=3   HM Knives

useful working height 45 mm ( upon request 60 mm )

two HF motors featuring automatic timed operation to avoid panel chipping

1st motor anti-clockwise rotation / 2nd motor clockwise rotation

• Gluing and edge pressure units

Teflon tank / Glue spreading roller

Temperature controlled through the control panel for  both units.

Glue tank with automatic stand-by of the temperature.

First motorized and clutched roller Ø 135 mm, plus 3 pressure idle rollers Ø 75mm

• End-Cutting unit

2  HF tilting motors 12.000 rpm  -  HP 0,7 ( kW 0,5 ) each

• Fine-Trimming unit

2 HF tilting motors 12.000 rpm  -  HP 1 ( kW 0,7 ) each

with digital readout

• Scraping unit
• Brushing unit

2 motors  -  HP 0,5 ( kW 0,38 ) each

with cloth discs ø 180 mm

Optional:

KIT 2 CUTTERS DIAMOND H55

KIT 2 CUTTERS DIAMOND H65 (useful working height 60 mm)

ANTI ADHESIVE UNIT

CLEANING UNIT

UPPER CLAMP MOTORISED LIFTING

HEATING LAMP BEFORE THE GLUING UNIT

PNEUMATIC DISENGAGEMENT FROM CONTROL PANEL (on/off)    -                             each unit

QUICK WORK CHANGEOVER DEVICE To manage FROM THE CONTROL PANEL the switching from thin edges to thicker edges (ABS/PVC)  Pressure roller conveyor/Trimming unit/Edge scraping

PNEUMATIC TILTING OF END CUTTER FROM CONTROL PANEL From 0° to 10°

GLUE SCRAPER  ( on/off from control panel)

GLUE SCRAPER INSTEAD OF EDGE SCRAPER

HOT BLOWER UNIT for PVC and ABS

VOLTAGE DIFFERENCE (STD 400/50)