Automatic Edgebander : SUPERMAC-M

BackMenu
Home

rswood cmc logo



SUPERMAC-M

supermac_m
10_pannello di controllo4
2_gruppo incollaggio2
3_gruppo intestatore6
4_gruppo rifilatore
5_gruppo spigolatore8
6_gruppo arrotondatore6
7_gruppo raschia bordo7
9_gruppo spazzole3
8_gruppo raschia colla_opt7
12_sistema di lubrificazione pulitore_opt9
Add product to the quotation

Descrizione

Technical data:

-  Min. width of the panelmm 80
-  Min. length of the panelmm 180
-  Max. thickness of the panelmm 60
-  Rounder working heightmm 45
-  Min. thickness of the panelmm 9
-  Edge dim. in strips   min. - max.mm 0,4 - 15
-  Edge dim. in rolls   min. - max.mm 0,4 - 3
-  2 feed speeds               m/1’  12/16
-  Glue tank capacitylt 2
-  Installed motor powerkW 10,6
-  Air pressureBar  7
-  WeightKg 2000
-  Overall dimensionsmm 5700 x 900 x 1600

CE equipment:

  • Tape roll holder table ø 700 mm
  • Conveyor roller for wide panels
  • 3 mm thickness roll edge cutter
  • Manual movement of the upper pressure with digital readout
  • Teflon tank
  • Protection booth on all operation units
  • Nr. 2 dust extraction hoods ø 100 mm
  • Automatic loader of edges in strips
  • Units managed by PLC
  • Hanging control panel – Touch screen 10 inch monitor
  • CE standard

Operating units:

  • Gluing and edge pressure units

Teflon tank / Glue spreading roller

Temperature controlled through the control panel for  both units.

Glue tank with automatic stand-by of the temperature.

First motorized and clutched roller Ø 135 mm, plus 3 pressure idle rollers Ø 75mm

  • End-Cutting unit

2  HF tilting motors 12.000 rpm  -  HP 0,7 ( kW 0,5 ) each

  • Rough-Trimming unit

2 HF motors 12.000 rpm  -  HP 1,5 ( kW 1,1 ) each

with digital readout

  • Fine-Trimming unit

2 HF tilting motors 12.000 rpm  -  HP 1 ( kW 0,7 ) each

with digital readout

  • Rounding unit

2 HF motors 12.000 rpm  -  HP 0,7 ( kW 0,5 ) each

  • Scraping unit
  • Brushing unit

    2 motors  -  HP 0,5 ( kW 0,38 ) each

    with cloth discs ø 180 mm

Optional:  

CLEANING UNIT

UPPER CLAMP MOTORISED LIFTING

HEATING LAMP BEFORE THE GLUING UNIT

PNEUMATIC DISENGAGEMENT FROM CONTROL PANEL

(on/off)    

QUICK WORK CHANGEOVER DEVICE

To manage FROM THE CONTROL PANEL the switching from thin edges to thicker edges (ABS/PVC) 

Press. roller conv./Trimming unit/Rounding unit/Edge scrap.

PNEUMATIC TILTING OF END CUTTER FROM CONTROL PANEL

From 0° to 10°

GLUE SCRAPER  ( on/off from control panel)

GLUE SCRAPER INSTEAD OF EDGE SCRAPER

HOT BLOWER UNIT for PVC and ABS

VOLTAGE DIFFERENCE (STD 400/50)