MAXIMAC

Automatic Edgebander / 15mm with Pre-milling and Corner Rounding
maximac6
10_pannello di controllo41
1_gruppo rettifica89
2_gruppo incollaggio34
3_gruppo intestatore2
4_gruppo rifilatore4
5_gruppo spigolatore7
6_gruppo arrotondatore3
7_gruppo raschia bordo4
9_gruppo spazzole1
8_gruppo raschia colla_opt73
11_antiadesivante_opt3
12_sistema di lubrificazione pulitore_opt92
Add product to the quotation

Description

Technical data:

-  Min. width of the panel mm 80
-  Min. length of the panel mm 180
-  Max. thickness of the panel mm 60
-  Rounder working height mm 45
-  Min. thickness of the panel mm 9
-  Edge dim. in strips   min. - max. mm 0,4 - 15
-  Edge dim. in rolls   min. - max. mm 0,4 - 3
-  2 feed speeds                m/1’  12/16
-  Glue tank capacity lt 2
-  Installed motor power kW 14,2
-  Air pressure Bar  7
-  Weight Kg 2300
-  Overall dimensions mm 6300 x 900 x 1600

CE equipment:

  • Tape roll holder table ø 700 mm
  • Conveyor roller for wide panels
  • 3 mm thickness roll edge cutter
  • Manual movement of the upper pressure with digital readout
  • Teflon tank
  • Protection booth on all operation units
  • Nr. 3 dust extraction hoods ø 100 mm
  • Automatic loader of edges in strips
  • Units managed by PLC
  • Hanging control panel – Touch screen 10 inch monitor
  • CE standard

Operating units:

  • Pre-Milling unit

2 HF motors 12.000 rpm - HP 2,5 ( kW 1,8 ) each

2 cutters ø 80 x 50 x 20  Z=3   HM Knives

useful working height 45 mm ( upon request 60 mm )

two HF motors featuring automatic timed operation to avoid panel chipping

1st motor anti-clockwise rotation / 2nd motor clockwise rotation

  • Gluing and edge pressure units

Teflon tank / Glue spreading roller

Temperature controlled through the control panel for  both units.

Glue tank with automatic stand-by of the temperature.

First motorized and clutched roller Ø 135 mm, plus 3 pressure idle rollers Ø 75mm

  • End-Cutting unit

2  HF tilting motors 12.000 rpm  -  HP 0,7 ( kW 0,5 ) each

  • Rough-Trimming unit

2 HF motors 12.000 rpm  -  HP 1,5 ( kW 1,1 ) each

with digital readout

  • Fine-Trimming unit

2 HF tilting motors 12.000 rpm  -  HP 1 ( kW 0,7 ) each

with digital readout

  • Rounding unit

2 HF motors 12.000 rpm  -  HP 0,7 ( kW 0,5 ) each

  • Scraping unit
  • Brushing unit

2 motors  -  HP 0,5 ( kW 0,38 ) each

with cloth discs ø 180 mm

Optional:

KIT 2 CUTTERS DIAMOND H55

KIT 2 CUTTERS DIAMOND H65 (useful working height 60 mm)

ANTI ADHESIVE UNIT

CLEANING UNIT

UPPER CLAMP MOTORISED LIFTING

HEATING LAMP BEFORE THE GLUING UNIT

PNEUMATIC DISENGAGEMENT FROM CONTROL PANEL

(on/off)   

QUICK WORK CHANGEOVER DEVICE

To manage FROM THE CONTROL PANEL the switching from thin edges to thicker edges (ABS/PVC) 

Press. roller conv./Trimming unit/Rounding unit/Edge scrap.

PNEUMATIC TILTING OF END CUTTER FROM CONTROL PANEL

From 0° to 10°

LUBRICATION SYSTEM FOR BUFFING UNIT

GLUE SCRAPER  ( on/off from control panel)

GLUE SCRAPER INSTEAD OF EDGE SCRAPER

VOLTAGE DIFFERENCE (STD 400/50)