SMARTMAC

Automatic Edge Bander / 8mm
smartmac2
2_gruppo incollaggio9
3_gruppo intestatore5
5_gruppo spigolatore6
7_gruppo raschia bordo
9_gruppo spazzole
8_gruppo raschia colla_opt5
10_pannello di controllo_opt6
12_sistema di lubrificazione pulitore_opt3
Add product to the quotation

Description

Technical data:

-  Min. width of the panel

mm 80

-  Min. length of the panel

mm 180

-  Max. thickness of the panel

mm 60

-  Min. thickness of the panel

mm 9

-  Edge dim. in strips   min. - max.

mm 0,4 - 8

-  Edge dim. in rolls   min. - max.

mm 0,4 - 3

-  Feed speed

m/1’  12

-  Glue tank capacity

lt 2

-  Installed motor power

kW 7,1

-  Air pressure

Bar  7

-  Weight

Kg 1400

-  Overall dimensions

mm 4200 x 900 x 1600

CE equipment:

  • Tape roll holder table ø 700 mm
  • Conveyor roller for wide panels
  • 3 mm thickness roll edge cutter
  • Manual movement of the upper pressure with digital readout
  • Teflon tank
  • Protection booth on all operation units
  • 1 dust extraction hood ø 100 mm
  • Automatic loader of edges in strips
  • Touch screen control panel ( ON-OFF motors )
  • Hanging control panel
  • CE standard

Operating units:

  • Gluing and edge pressure units

Teflon tank / Glue spreading roller

Temperature controlled through the control panel for  both units.

Glue tank with automatic stand-by of the temperature.

First motorized and clutched roller Ø 135 mm, plus 3 pressure idle rollers Ø 75mm

  • End-Cutting unit

2  HF tilting motors 12.000 rpm  -  HP 0,7 ( kW 0,5 ) each

  • Fine-Trimming unit

2 HF tilting motors 12.000 rpm  -  HP 1 ( kW 0,7 ) each

with digital readout

  • Scraping unit
  • Brushing unit

2 motors  -  HP 0,5 ( kW 0,38 ) each

with cloth discs ø 180 mm

Optional:

TOUCH SCREEN 10 inch monitor

Include PLC to manage the units

Compulsory for optional : SM.MAC. 4-6-7-8

CLEANING UNIT

UPPER CLAMP MOTORISED LIFTING

HEATING LAMP BEFORE THE GLUING UNIT

PNEUMATIC DISENGAGEMENT FROM CONTROL PANEL

(on/off)    -                             each unit

QUICK WORK CHANGEOVER DEVICE

To manage FROM THE CONTROL PANEL the switching from thin edges to thicker edges (ABS/PVC) 

Pressure roller conveyor/Trimming unit/Edge scraping

PNEUMATIC TILTING OF END CUTTER FROM CONTROL PANEL

From 0° to 10°

GLUE SCRAPER 

GLUE SCRAPER INSTEAD OF EDGE SCRAPER

HOT BLOWER UNIT for PVC and ABS

VOLTAGE DIFFERENCE (STD 400/50)