SE 3200A

se_3200a3
Add product to the quotation

Description


Technical data:

-  Squaring width

mm  3200

-  Table dimensions

mm  1250 x 670

-  Sliding table dimensions

mm  3200 x 400

-  Squaring frame dimensions

mm  1400 x 640

-  Max. saw blade Ø/hole without scoring unit

mm  550/30

-  Max. saw blade Ø/hole

mm  500/30

-  scoring blade Ø/hole

mm  125/20

-  Cutting height with blade ø 450 at 90°

mm  175/200

-  Cutting height with blade ø 450 at 45°

mm  120/140

-  Saw blade speeds managed by control panel

From 2500 to 5000 rpm

-  Cutting width on parallel fence

mm 1250

-  Main motor power

HP  7,5

-  Scoring motor power

HP 1

-  Weight

Kg  1190

CE equipment:

  • CE standard
  • Main motor managed by inverter
  • Scoring unit with independent motor and movement on linear guides (motor HP 1 – blade ø 125 / hole ø 20)
  • HM saw blade  
  • Hanging saw blade protection type CX 550
  • 2 dust extraction hood (1 x ø 120mm, 1 x ø 100mm)
  • Extension tables
  • Eccentric clamp
  • Angular cutting device
  • Hanging control panel with touch-screen monitor 10’
  • Powered saw blade unit upstroke and tilting managed by V10 control panel:
  1. Manual and automatic lifting of the saw blade
  2. Manual and automatic tilting of the saw blade
  3. Speed selection of the saw blade (it depends on the blade ø)
  4. Readout on encoder
  5. Automatic axis calibration

Optional:

POWERED PARALLEL FENCE MANAGED BY “V10” CONTROL PANEL WITH MANUAL, AUTOMATIC AND INCREMENTAL FUNCTION :

  • Readout on encoder
  • pneumatic self-locking  device
  • presence detection system for the automatic change of fence position, according to the used fence profile  ( high or low )
  • automatic axis calibration
  • automatic recovery of the quota  from cutting width, height and tilting of the blade

2 AXIS AUTOMATIC SETTING OF THE SCORING UNIT

SQUARING FRAME “EASY” TYPE WITH A MECHANICAL AUTOMATIC SELF-ADJUSTMENT OF THE STOPS POSITION

MOTOR HP 10

MOTOR HP 12

MOTOR HP 15

CUTTING WIDTH ON PARALLEL FENCE mm1500

SQUARING FENCE WITH 3 ELECTRONIC READOUT

ON/OFF SWITCHS ON THE CARRIAGE

ANGULAR CUTTING DEVICE WITH SELF-ADJUSTMENT OF THE STOP POSITION

SMALL TABLE FOR PARALLEL CUTS

BAR PNEUMATIC PRESSER FOR THE WHOLE LENGTH OF THE SLIDING TABLE

2nd SQUARING FRAME FOR SLIDING TABLE

PARALLEL FENCE WITH ELECTRONIC READOUT

DEDUCTION FOR MACHINE WITHOUT CX 450 PROTECTION