SE3800A

Add product to the quotation

Descrizione

- Squaring width	mm 3800
- Table dimensions	mm 1250 x 670
- Sliding table dimensions	mm 3800 x 400
- Squaring frame dimensions	mm 1400 x 640
- Max. saw blade Ø/hole without scoring unit	mm 550/30
- Max. saw blade Ø/hole	mm 500/30
- scoring blade Ø/hole	mm 125/20
- Cutting height with blade ø 500/550 at 90°	mm 175/200
- Cutting height with blade ø 500/550 at 45°	mm 120/140
- Saw blade speeds managed by control panel	from 2500 to 5000 rpm
- Cutting width on parallel fence	mm 1250
- Main motor power	HP 7,5
- Scoring motor power	HP 1
- Weight	Kg 1320

- CE standard
- Main motor managed by inverter
- Scoring unit with independent motor and movement on linear guides (motor HP 1-blade ø 125/hole ø20)
- HM saw blade
- Hanging saw blade protection type CX 550
- No. 2 dust extraction hood (1 x ø 120mm, 1 x ø 100mm)
- Extension tables
- Eccentric clamp
- Angular cutting device
- Hanging control panel with touch-screen monitor 10’
- Powered saw blade unit upstroke and tilting managed by VK3 control panel:

POWERED PARALLEL FENCE MANAGED BY “V10” CONTROL PANEL WITH MANUAL, AUTOMATIC AND INCREMENTAL FUNCTION :

Readout on encoder
pneumatic self-locking device
presence detection system for the automatic change of fence position, according to the used fence profile ( high or low )
automatic axis calibration
automatic recovery of the quota from cutting width, height and tilting of the blade

2 AXIS AUTOMATIC SETTING OF THE SCORING UNIT

SQUARING FRAME “EASY” TYPE WITH A MECHANICAL AUTOMATIC SELF-ADJUSTMENT OF THE STOPS POSITION

MOTOR HP 10

MOTOR HP 12

MOTOR HP 15

CUTTING WIDTH ON PARALLEL FENCE mm1500

SQUARING FENCE WITH 3 ELECTRONIC READOUT

ON/OFF SWITCHS ON THE CARRIAGE

ANGULAR CUTTING DEVICE WITH SELF-ADJUSTMENT OF THE STOP POSITION

SMALL TABLE FOR PARALLEL CUTS

BAR PNEUMATIC PRESSER FOR THE WHOLE LENGTH OF THE SLIDING TABLE

2nd SQUARING FRAME FOR SLIDING TABLE