NSE-X: THE CIRCULAR SAW WITH FIXED OR INCLINABLE BLADE
The NSE-X model is a circular saw with fixed or tilting blade designed and built by RS Wood starting from the NSE 3200 Model.
We are talking about a woodworking machine certainly cheaper than the basic model since it does not have the front wagon and is not inclinable.
The NSE-X can be used to cut wood and solid wood panels, polystyrene, aluminum and light alloys, plastics and insulating materials.
The machine is mainly dedicated to craftsmen and industry because the dimensions and the power of the engines are adapted to processes that require greater complexity.
SAFETY AND MAINTENANCE
All machines feature is a protection system of the blades in line with regulations. There are also emergency buttons with microswitches to stop the power supply in case of need.
For a correct maintenance we recommend to carry out a daily or weekly cleaning from dust, shavings and sawdust or connect the suction mouths to industrial vacuum cleaners.
WARRANTY
All RS WOOD - CMC products are guaranteed against defects in materials and workmanship under normal use and maintenance conditions. The warranty period is 12 months from the date of purchase.
TECHNICAL DATA
Sliding table dimensions | Not present |
Table dimensions | Fixed |
Squaring frame dimensions | Not present |
Saw blade ø/hole | mm 400/30 |
Cutting height with blade ø 300 at 90°/45° | mm 100/70 |
Cutting height with blade ø 400 at 90°/45 | mm 125/90 |
Cutting width on parallel fence | mm 1250 |
3 Saw blade speed | G/min 2800/4000/5600 |
Motor power | HP 7.5 |
Weight | Kg 500 |